Linda Tapping machine - Hoporo Machinery 复制

Butt welding machine

1. Ensure that the cooling water in front of the machine is sufficient, clean and unobstructed. 2. Adjust the current to the appropriate position. 3. Before welding, grind the welding surface smooth. 4. Separate the two or three claws, clamp the tap in the left three claws, with the handle exposed by 1 to 2 centimeters, ensuring the clamping

Single-spindle servo slotting machine

Full automatic Nylock nut nylon washe rassembly machine

Axle pin drilling machine

CNC Lathe with Rear Feeding, Model 32#

Automatic feeding Equipped with a rear feeding mechanism, usually with a guide-plate type magazine and rotary cylinder clamping. It can automatically receive material, with a typical feeding length within 400 mm, effectively improving processing efficiency and reducing manual operation. CNC control Controlled by a computer numerical control system (such as PLC), it can accurately control various movements of the lathe, achieving high-precision machining. It can perform facing, chamfering, grooving, turning, drilling and other operations.

End face locking nut forming machine

CNC Lathe with Rear Feeding, Model 0640#

Common Applications This type of lathe is specifically designed for mass production of finished parts that start as individual blanks. Common applications include: Fasteners: Screws, bolts, nuts, and washers. Automotive Parts: Pistons, pins, valve components, and gears. Hardware Components: Fittings, connectors, and precision machined parts. Plastic &amp; Rubber Parts: Machining of pre-molded plastic components.

M14-M20 Fully automatic 4-spindle tapping machine

M6-M12 Fully automatic 4-spindle tapping machine

M6-M12 Special-shaped nut fully automatic 4-spindle tapping machine

M6-M12 Fully automatic intelligent 4-spindle tapping machine

1. When the rear discharge door of this machine is opened, the spindle will not be able to start. This is to prevent the operator from getting injured during abnormal startup. 2. This machine has an abnormal alarm prompt. The fault code will be displayed on the touch screen, facilitating the operator&#39;s troubleshooting. 3. This machine is equipped with torque monitoring and nut status monitoring. 4. This machine is equipped with two sets of oil sludge separators. They can effectively separate the tap oil and waste chips, preventing the waste chips from entering the oil tank and avoiding the wear of the tap and the deterioration of the surface finish of the nuts. 5. This machine is equipped with a defective product sorting mechanism. When there is abnormal torque, the number of nuts set at the front and rear of this mechanism will not stop and will flow into the defective product transfer box continuously. (The rear discharge of this machine is equipped with two independent discharge outlets and one defective product discharge outlet.)

Two axis tapping machine with outer frame

Single spindle tapping machine without frame

2-Spindle tapping machine

Single axis tapping machine with outer frame

Image recognition screening press machine

Nut threading machine and pressing machine

CCD Sorting Machine

Non-standard customization automatic copper block drilling and chamfering machine

Non-standard customization full automatic large thread double axis tapping machine

显示更多